Coo-var Anti-Slip Acrylic Floor Paint

Coo-Var Anti-Slip Acrylic Floor Paint

Durable & hard-wearing anti-slip finish for indoor & outdoor

Coo-Var Anti-Slip Acrylic Floor Paint is used to provide a durable and hard wearing surface with an anti-slip finish. This product has been independently tested and has a PTV rating of 68 in dry conditions and 58 in wet. UK law recommends on a minimum Pendulum Test Value on floors of 36 dry, wet or contaminated. Suitable for indoor and outdoor use. It can be used on concrete, wood, tarmac, stone, brickwork and suitably prepared metal. Advice should be sought for coating new timber or pressure preservative treated timber.

Low Risk In Wet & Dry Conditions (Tested to BS7976-2)

Application: Roller or brush

Drying time: Touch Dry 1 hours or 2 hours hard dry

Overcoat time: 6 hours

Estimated Coverage: 5-9 sq m² per litre

Surface Preparation

All surfaces should be clean, dry, sound and free from contaminants. Concrete - power floated, granolithic and smooth surfaces should be roughened first to provide a good "key" for the paint. This can be done mechanically by abrading or blasting, or chemically, using Coo-Var Acid Etch. These processes will have the advantage in addition to preparing the surface of also removing dirt and laitance. New concrete must be allowed to cure thoroughly which can take up to 3 months. Other surfaces have to be prepared and primed with the suitable primer for that substrate. Existing painted surfaces - Surfaces should be cleaned, degreased and sanded to ensure an adequate "key" is produced. Remove all loose and flaking material and treat bare areas as new substrate and prepare accordingly.

Application Conditions

As dictated by normal good painting practice. In confined spaces, provide adequate ventilation during application and drying. Do not paint when temperature will be at or below 7 °C during the painting and drying process.

Preceding Coat

Apply direct to wood, Coo-Var All Metals Primer on Metal, Coo-Var Anti-Slip Acrylic Floor Paint thinned 5% with clean water on all other unpainted surfaces.

Subsequent Coat

Coo-Var Anti-Slip Acrylic Floorpaint

Remarks

Do not paint when temperature will be at or below 7 °C during the painting and drying process.