Rustins Anti-Corrosion Metal Primer

Product: Rustins Anti-Corrosion Metal Primer
Type: Metal Primer available in grey and red
Intended Use: On all bare metal for interior and exterior use
Special Features: Formulated with rust converters to prevent further corrosion and can be applied direct to rust.
Preparation: Ensure the surface is clean and free from dirt, grease, previous loose coatings and contaminants. Do not apply on damp metal.
Application: Use a good quality brush and apply evenly. Thin with Rustins Xylene Thinners as required. For spray application thin 2 parts paint to one part thinners, dependent on equipment used.
Coats: 1 coat is usually sufficient. A second coat may be applied if required. Three coats are advisable if left as a finished coat.
Drying Time: 4-8 hours depending on temperature and humidity.
Re-coating Time: 4-8 hours depending on temperature and humidity.
Application Temp.: Ideally 15-25°C. Do not use below 10°C, or in conditions of high humidity.
Coverage: 10 – 12sq metres/litres per coat, depending on absorbency of the surface.
Maintenance: The surface may be cleaned with a mild detergent solution or White Spirit as necessary. Worn areas may be re-coated once cleaned and lightly sanded to provide a key.
Compatibility: Not compatible with previous loose coatings, grease and contaminants. If topcoat is water-based, primer must be left to fully cure.
Settlement: Stir well before use Shelf-life/Storage: 2 years from date of manufacture if stored in original tightly closed container in cool dry conditions.
Hazards: Flammable. Keep out of reach of children. Use only in well ventilated areas. Keep away from sources of ignition – no smoking. Avoid contact with skin and eyes. After contact with skin, wash immediately with plenty of soap and water or a proprietary skin cleanser. Do not use White Spirit. A full Safety Data Sheet is available upon request.
Clean-Up: Clean equipment with Rustins Xylene Thinners or Brush Cleaner. If paint has dried use Rustins Brush Restorer.